Q-TECH MEASUREMENTS

DAkkS test report

Do you want reliable and legally compliant measurement results with worldwide acceptance?

We are one of the few testing laboratories in Germany to be accredited by the German Accreditation Body (DAkkS) for both tactile measurements and CT measurements.

Accreditation in accordance with DIN EN ISO/IEC 17025 demonstrates our metrological expertise and gives you the assurance that our work complies with global technical standards.

Q-Tech Roding employees work in front of the ZEISS METROTOM 1500 computer tomograph

Homepage > Q-Tech Services > Q-Tech Measurements > Specific service

Technologies

KMS

3D scan

"The proof of quality - we are your competent partner with accredited measurement technology. You can rely on our precise test results."

To the point

Whether dimensional measurement, cavity and defect analysis or target/actual comparisons, our DAkkS test report provides standard-compliant and internationally recognized proof of precise and reliable measurements.

Our test laboratory is accredited for both computer tomography and tactile sensors on KMS including turntable. This competence is monitored and verified by the Deutsche Akkreditierungsstelle GmbH (DAkkS) at regular intervals.

This enables us to produce meaningful DAkkS test reports for the determination of dimensional and shape deviations, 3D target/actual deviations and for carrying out analyses in the field of blowhole testing.

ZEISS METROTOM 1500 in the Q-Tech measuring laboratory

DAkkS accreditation

DAkkS accreditation is proof of our competence and confirms the precise working methods of our measurement experts. We document all tests and measurement results in our DAkkS test reports with the accreditation symbol. This gives you the greatest possible confidentiality and the guarantee of exact measurement results with every single test report.

Our quality work in accordance with the current DIN EN ISO/IEC 17025 was reconfirmed by the German Accreditation Body (DAkkS) in 2023.

Click here for the current accreditation certificate

Close-up of the Q-Tech Roding accreditations

Our expertise at a glance

Services

Test results according to DIN EN ISO/IEC 17025
Accredited for 3D target/actual deviations, defect analyses, blowhole tests, as well as dimensional and shape deviations
Traceability of all measurement results
Standardized logging of measured values
Possibility to attach individual views or information
Test report as PDF file

Advantages

Reliable dimensional measurement results according to clearly defined and monitored environmental conditions
Procedural and legal certainty e.g. independent expert opinions and disputes
Comparability of measurement data guaranteed
International recognition of DAkkS test reports
Competent advice and implementation
Traceable and meaningful DAkkS test reports

Our computer tomographs

ZEISS METROTOM 800

X-ray tube: 130 kV
Measuring accuracy: MPE SD(TS): 2.9+L/100 µm
Resolution: 1536 x 1920 pixels (2K detector)
max. measuring volume: [mm] Ø 275 x 360
Accreditation: yes

Determination of dimensional and shape deviations of industrially manufactured products using computer tomography (CT);
Determination of 3D target/actual deviations of industrially manufactured products using CAD data or reference data with the aid of computer tomography (CT) and corresponding evaluation software;
Carrying out analyses in the field of blowhole testing on workpieces with the aid of computer tomography (CT);

ZEISS METROTOM 1500

X-ray tube: 225 kV
Measuring accuracy: MPE SD(TS): 4.5+L/50 µm
Resolution: 3072 x 3072 pixels (3K detector)
max. measuring volume: [mm] Ø 615 x 870
Accreditation: yes

Determination of dimensional and shape deviations of industrially manufactured products using computer tomography (CT);
Determination of 3D target/actual deviations of industrially manufactured products using CAD data or reference data with the aid of computer tomography (CT) and corresponding evaluation software;
Carrying out analyses in the field of blowhole testing on workpieces with the aid of computer tomography (CT);

Our measuring devices

ZEISS PRISMO ULTRA

Measuring range: 700 x 1000 x 500 mm
Measuring accuracy: MPE_E: 0.5 +L/500 µm
Measuring probe / probe head: VAST-Gold
Additional equipment: integrated turntable
Measuring software: CALYPSO
Accreditation: yes

Determination of dimensional and shape deviations of industrially manufactured products using tactile sensors on 3D coordinate measuring systems (CMM) with rotary table

‍

View all the equipment

Do you have any questions?